Filter
Top Products
VigorSwitch P2260 User’s Guide
68
Edit Administrative Control: When you create GVRP group, you can use Administrative
Control function to change Applicant Mode and Registrar
Mode of GVRP group member.
Refresh: Refresh function can help you to see current GVRP group
status.
2
2
.
.
1
1
1
1
S
S
T
T
P
P
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1D) for avoiding
loops in switched networks. When STP is enabled, ensure that only one path is active
between any two nodes on the network at a time. User can enable Spanning Tree Protocol
on switch’s web management and then set up other advanced items. We recommend that
you enable STP on all switches to ensure a single active path on the network.
2
2
.
.
1
1
1
1
.
.
1
1
S
S
T
T
P
P
S
S
t
t
a
a
t
t
u
u
s
s
Function name:
STP Status
Function description:
In the Spanning Tree Status, user can read 12 parameters to know STP current status. The
12 parameters’ description is listed in the following table.
Parameter description:
STP State: Show the current STP Enabled / Disabled status. Default is “Disabled”.
Bridge ID: Show switch’s bridge ID which stands for the MAC address
of this switch.
Bridge Priority: Show this switch’s current bridge priority setting. Default is
32768.
Designated Root: Show root bridge ID of this network segment. If this switch
is a root bridge, the “Designated Root” will show this
switch’s bridge ID.