Filter
Top Products
18
Using the Remote Control
Using the Remote Control with a Signal Cable
When the signals from the remote control cannot be reached due to the range or positioning of the projec-
tor, you can connect the remote control to the projector with a ø3.5 mm minijack cable (commercially available).
Switching the Remote Control Mode
The remote control has two functions. One is projector control and the other is wireless computer mouse.
Slide the ADJ./MOUSE switch on the remote control to other side compatible to the desired usage.
Info
• When using the remote control as the wireless computer mouse, connect the supplied remote mouse
receiver to the computer. (See page 19.)
Side view
Remote control
To WIRED R/C JACK
To WIRED REMOTE terminal
ø3.5 mm minijack cable (commercially available)
ADJ.
MOUSE
ADJ.
MOUSE
Projector control Wireless computer mouse