Filter
Top Products
83
Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Menu operation
Page 56
Example: “Options (2)” screen menu
Description of Lamp Timer (Life)
* This is a reference value and is not guaranteed.
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The table above indicates rough estimates in the
case of using only in each mode shown.
• The lamp life may vary depending on the usage
condition.
Lamp usage condition
Operated exclusively
while “Eco Mode” is
“ON”.
Operated exclusively
while “Eco Mode” is
“OFF”.
Remaining lamp life
100% 5%
Approx. Approx.
3,000 hours* 150 hours*
Approx. Approx.
2,000 hours* 100 hours*
Setting the Lamp Mode
This function allows you to select the usage of
the two lamps installed in the projector.
Menu operation
Page 58
Example: “Options (2)” screen menu
Description of Lamp Mode
Description
Both lamps are used for greater
brightness.
The lamp 1 is used.
When the lamp 1 burns out, the lamp 2
automatically switches in use.
The lamp 2 is used.
When the lamp 2 burns out, the lamp 1
automatically switches in use.
Both lamps are used alternately, one
by one, for certain periods.
Selectable items
Both Lamps
Lamp 1 Only
Lamp 2 Only
Equal Use