Filter
Top Products
3.3.2 Mounting on a DIN Rail
At the top rear of the Tuba, a horizontal groove lets you quickly and easily snap the drive
onto a DIN rail in your work area.
To mount the Tuba on a DIN rail:
2. Be sure that the vertical mounting strip (with the hole at the top) is pressed down fully
and does not protrude from the top of the instrument.
Figure 3-2: Mounting Strip Pressed Down
Tilt the Tuba back towards the top part of the DIN rail.
Figure 3-3: Attaching Top Part of Mounting Groove to DIN Rail
Tuba Installation Guide Installation
MAN-TUBIG (Ver. 1.3)
3-6