Filter
Top Products
Fibre Channel FC4700 Array to IP4700 File Server Conversion Guide
11
Loading IP4700 Software
Note: If you see the error message: disk 2 not on the loop, ensure
that the disk 2 LED is on solid and repeat Step 15 before trying again.
To finish the FC4700-to-IP4700 conversion, you must clear (zero) all
the disks in the system of previous data, and complete the IP4700
factory initialization process. The next section in this guide describes
the zero disk and factory initialization procedures.
FS > dsktodsk 2,0
↵
Installing image from disk 2 to disk 0.......
.............................................
.............................................
............................................