Filter
Top Products
22
Fibre Channel FC4700 Array to IP4700 File Server Conversion Guide
Factory Initialization
23. At the fcli > prompt, type setser and then press <Enter>.
24. Verify that you entered the serial number accurately. If the serial
number is incorrect, repeat Steps 19 through 23.
25. At the fcli > prompt, type clearlog and then press <Enter>.
26. At the fcli > prompt, type menu and then press <Enter>.
The system exits fcli mode and displays the Boot Console menu.
Boot Console
1. Perform Factory Initialization
2. Access FCLI
3. Recover Administrative State
4. Recreate System Volumes
5. Check File System on Volumes
6. Authorized Service Personnel Only
Q. Quit Boot Console.
Enter Number Of Your Choice: 2
↵
FCLI Passthru Command Line. Type menu to return to menu interface.
fcli >
fcli> setser ↵
Current serial number is: f20004701426