Filter
Top Products
Fibre Channel FC4700 Array to IP4700 File Server Conversion Guide
13
Factory Initialization
Once the IP4700 banner is displayed, you have a maximum of 60 seconds to
enter ^V.
Entering ^V should cause the following to display immediately:
If Enabling Factory Initialization Startup does not
display, one of the following may occur:
– The system reboots and comes up to the IP4700 banner.
Starting SP Components. Please Wait.....
Raid System Started Successfully........
(the display will recycle)
– The system hangs.
In either case manually reset the SPs. Reset SP A first, then SP B.
You can reset the SPs by power cycling the system, as described in
step 3 on page 12.
5. Enter ^V at the IP4700 banner.
@@@@@@
@@
@@
@@
@@
@@
@@@@@@
@@@@@
@@ @@
@@ @@
@@ @@
@@@@@
@@
@@
@@@
@@@
@@@
@@@
@@@@@@@
@@
@@
@@@@@@
@@ @@
@@
@@
@@
@@
@@
@@
@@
@@ @@
@@ @@
@@ @@
@@
@@
@@
@@
@@ @
@
@@ @
@
@@ @
@
@@
@@
Starting SP Components. Please Wait....
================================================
==== Enabling Factory Initialization Startup ====
================================================
Raid System Started Successfully......