Emerson 400V Power Supply User Manual


 
Battery Installation
35
Figure 20 SENXA0NBCWXX4LCB_4x2
W301
W101
W102
W002
W001
W001
W001
W001
W001
W001
W003
W001
W001
W001
W002
W002
W002
W002
W002
W302
W001
W001
W001
W001
W001
W001
W001
W001
W001
W001
W001
W001
W001
W001
W002
W001
W001
W001
W001
W001
W001
W002
W002
Tray in Layer 1
Tray in Layer 3
FRONT VIEW
BCB(125/200A)
TO UPS
Tray in Layer 2
SPACE
BCB
Tray in Layer 4
TO UPS
Tray master
Tray master
Layer 1
Tray master
Layer 2
Tray slave
Layer 1
Tray slave
Layer 2
Tray master
Layer 3
Layer 4
BCB
SPACE
Tray master Tray slave
Tray slaveTray master
Tray slave
Tray master
Tray master Tray slave
N.O.
V<
BLACK
RED
P
N
BLUE
Temp. transport
P12
OUT
GREEN
RED
X108-3
GREEN
RED
X103-2
X103-1
X103-3
X102-2
X102-3
X102-4
X108-2
X108-1
X102-1
X100-3
Temp. channels reserved for Batt. cabinet Paralleling
GND
J1
BLUE
X101-3
BCB Control board
X104-2
X104-1
X104-3
X105-1
X100-4
X100-1
X100-2
X105-3
X105-2
X106-1
X106-3
X106-2
X101-1
NOTES:
1. Please refer to BCB BOX user instructions for cable connection.
2. If no internal Control board used, temp. transport cables should be connected directly
to external BCB control board. Meanwhile, the undervoltage release function for the internal BCB is not needed.
3. Used for: A412/85 F10.