Filter
Top Products
Instruction Manual
IM-105-4000, Original Issue
August 2005
OPM 4000
http://www.raihome.com
Section 9 Replacement Parts
Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9-1
SPARE PARTS
Level I, General maintenance supplies recommended for all users.
Level II, Back up critical printed circuit boards and parts suggested permitting
rapid return to service if corrective maintenance is needed. Level II is
recommended in addition to Level I for those users requiring maximum
instrument availability.
Level III, If you cannot operate your facility without a monitor in operation.
Level III is recommended in addition to Level I.
Qty P/N Description
Level I
1 per plant 1232 Micro-turn 200 on-line test reflector kit, 3
filters and case.
1 per inst. 1466 Retro latch, spring and gasket repair kit.
Optional air purge spares.
1 per 4 inst. or 1 per plant 1258 Standard air purge blower, min 5 CFM @ 36
in. H2O, max 36 CFM @ 2 in. H2O
1 per 4 inst. or 1 per plant 1885 Air flow switch assembly for air purge blower.
Level II
1 per 4 inst. or 1 per plant 2555 CPU board.
1 per 4 inst. or 1 per plant 2556 Backup Memory Module, 8kx8 EEPROM.
1 per 4 inst. or 1 per plant 2372 Zero reflector iris assembly with rotary
solenoid, retro tape and zero arm.
1 per 4 inst. or 1 per plant 1668 Power/modulator board.
Level III
1 per 4 inst. or 1 per plant 1366 Stand by compliance OPM 4000 control unit,
service module, transceiver and retro 3-15 ft
(0,3 - 4,6 m).
Tools
1 per 4 inst. XXXX 4 Pack of air filter replacements, contact the
factory for p/n
1234 Opacity test stands.
1073 Control unit to service module 10 ft (3,05 m)
test cable.
1078 Flange alignment tool.