Emerson IS-WEB485ADPT Network Card User Manual


 
Network Settings
12
5.0 NETWORK SETTINGS
The IP Network Settings Menu is used to enable network
communications with the Web card.
Refer to the following sections for detailed step-by-step
instructions on each item from this menu:
Table 8 Network Settings menu guide
Menu item Refer to:
5.1 - Boot/IP Settings page 13
5.2 - Domain Name Server (DNS) Settings page 14
5.3 - Management Protocol page 15
5.4 - Web Server page 19
5.5 - Telnet Server page 24
5.6 - Time (SNTP) Menu page 24
5.7 - Change Username / Password page 26
5.8 - Reset Authentication to Factory Defaults page 27
IP Network Settings Menu
-------------------------
1: Boot/IP Settings
2: Domain Name Server (DNS) Settings
3: Management Protocol
4: Web Server
5: Telnet Server
6: Time (SNTP)
7. Change Administrator Username/Password
8: Change General Username/Password
9: Reset Authentication to Factory
Defaults
<ESC>: Cancel menu level
Please select a key ?>