Emerson MITX-430 Computer Hardware User Manual


 
Operation
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)
90
5.4.4 Boot Menu
PCI Express Port 1 Enable or disable PCI Express Root Port1. The options are:
z Auto
z Enabled
z Disabled
Default value is Auto.
82574L LAN Controller Enable or disable on board WG82574L chip.
Default value is Enabled.
Note that this is only for MITX-440-DVI-2E.
Restore AC Power Loss Select AC power state when power is re-applied after a power failure.
The options are:
z Power Off
z Power On
z Last State
Default value is Last State.
Spread Spectrum Enable or disable Spread Spectrum. The options are:
Enabled and Disabled. Default value is Enabled.
Table 5-27 South Bridge (continued)
Field Description
Table 5-28 Boot Menu
Field Description
Quiet Boot Enable or disable Quiet Boot option. Default value is Disabled.
Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF)
means indefinite waiting. 0 means no waiting (not recommended).
Default value is 3.
Bootup NumLock State Select the keyboard NumLock state. Options are On and Off.
Default value is On.