Emerson MITX-430 Computer Hardware User Manual


 
Safety Notes
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)
117
Personal Injury or Short Circuits
Blade or Power Supply
In case the ORing diodes of the product fail, the product may trigger a short circuit between
input line A and input line B so that line A remains powered even if it is disconnected from the
power supply circuit (and vice versa).
To avoid damage or injury, always check that there is no more voltage on the line that has been
disconnected before continuing your work.
Personal Injury
At the system’s rear there are sharp pins which can cause injury.
Be careful when handling the system.
Data Loss and Product Damage
Following the emergency power off procedure results in data loss and may damage chassis
components in a running system.
Use this method only when normal shutdown procedures cannot be followed.
Configuration Switches/Jumpers
Product Malfunction
Switches marked as “Reserved” might carry production-related functions and can cause the
product to malfunction if their setting is changed.
Do not change settings of switches marked as “reserved”.
Product Damage
Setting/resetting the switches during operation can cause damage to the product.
Check and change switch settings before you install the product.
System Damage
Wrong jumper settings can make the shelf inoperable.
Never change the settings of the jumpers.