Filter
Top Products
Operation
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)
100
0xA8 SCSI enable.
0xA9 Setup verifying password.
0xAA Reserved for ASL. See Table 5-38 on page 102.
0xAB Start of setup.
0xAC Setup input wait.
0xAD Ready to boot event.
0xAE Legacy boot event.
0xAF Exit boot services event.
0xB0 Runtime set virtual address MAP begin.
0xB1 Runtime set virtual address MAP end.
0xB2 Legacy option ROM initialization.
0xB3 System reset.
0xB4 USB hot plug.
0xB5 PCI bus hot plug.
0xB6 Clean-up of NVRAM.
0xB7 Configuration reset (reset of NVRAM settings).
0xB8 Reserved for future AMI codes.
0xC0 OEM BDS initialization codes.
DXE Error Codes
0xD0 CPU initialization error.
0xD1 North Bridge initialization error.
0xD2 South Bridge initialization error.
0xD3 Some of the Architectural Protocols are not available.
0xD4 PCI resource allocation error. Out of resources.
0xD5 No space for legacy option ROM.
0xD6 No console output devices are found.
0xD7 No console input devices are found.
Table 5-35 DXE Status Codes (continued)
Status Code Description