Filter
Top Products
20 Aurorean Network Gateway-1100 User’s Guide
Chapter 3
Configuring the ANG-1100 with Aurorean Web Config
Setting Up the Internet Connection
Internet configuration of the External side of the ANG-1100 involves choosing
the type of IP address assignment the ANG-1100 will accept. The ANG can
accept one of the following:
! A DHCP-assigned IP address - your network automatically sets the
ANG’s IP address via the DHCP (Dynamic Host Configuration
Protocol) server. This is the factory default setting.
! A Manual-assigned IP address - you or your network administrator
set the ANG’s IP address and associated Subnet, Gateway, and DNS
values. Consult with your Network Administrator for required
values.
! A PPPoE (PPP over Ethernet) assigned IP address - your DSL
provider transparently sets the IP address via the use of a Username
and Password. Obtain this information from your service provider
before you enter this data.
Begin Internet Setup by performing the following steps:
1 Click the Internet Setup menu option.
The Internet Setup window appears as shown in Figure 15.