Filter
Top Products
30 Aurorean Network Gateway-1100 User’s Guide
Chapter 3
Configuring the ANG-1100 with Aurorean Web Config
NOTE
If you press the Reset button after you have configured your
ANG-1100, you will lose your entire configuration. Any settings you have
changed from factory defaults, such as firewall rules, will be removed. We
recommend that you save these settings to a Notepad file which you then
can reference if you are compelled to use the Reset button.
Setting Your Password
Because the default password is readily available through all ANG-1100
documentation, we strongly recommend that you ensure security by
configuring a new password to replace the default password netadmin.
NOTE
If you forget your password after changing it from the factory default,
you can return to using netadmin by pressing the Reset button and return
to all factory default values.
Change the Password by performing the following steps:
1 Click the Set Password menu option.
The Set Password window appears as shown in Figure 22.