Filter
Top Products
iv Aurorean Network Gateway-1100 User’s Guide
ELECTRICAL HAZARD: Only qualified personnel should perform installation
procedures.
Important Safety Instructions
1) Read these instructions carefully. Save these instructions for future reference.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
4) Do not use this product near water.
5) Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage
to the product.
6) Slots and openings in the chassis are provided for ventilation; to ensure reliable operation of the product
and to protect it from overheating, these openings should not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should
never be placed near or over a radiator or heat register, or in a built-in installation unless the proper
ventilation is provided.
7) This product should be operated from the type of power indicated on the marking label. If you are not sure of
the type of power available, consult Enterasys Networks or your local power company.
8) Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the
cord.
9) If an extension cord is used with this product, make sure that the total ampere rating of the equipment
plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the
total rating of all products plugged into the wall outlet does not exceed the fuse rating.
10) Never push objects of any kind into this product through chassis slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the
product.
11) Do not attempt to service this product yourself, as operating or removing covers may expose you to
dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
12) Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a) When the power cord or plug is damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore
the product to normal condition.
e) If the product has been dropped or the chassis has been damaged.
f) If the product exhibits a distinct change in performance, indicating a need for service.
13) Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should
be a detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or
equivalent. Maximum length is 15 feet (4.6 meters).