Filter
Top Products
26 Aurorean Network Gateway-1100 User’s Guide
Chapter 3
Configuring the ANG-1100 with Aurorean Web Config
Setting Up the LAN
LAN configuration of the Trusted side of the ANG-1100 involves choosing
either to manually set an IP address and subnet for the ANG-1100 or
dynamically assign its IP address via your network’s DHCP server. The
factory default LAN setting configures the ANG as a DHCP server on the
trusted LAN and automatically assign IP addresses to local PCs. Usually, this
setting need not be modified. Begin LAN Setup by performing the following
steps:
1 Click the LAN Setup menu option.
The LAN Setup window appears as shown in Figure 20.
Figure 20 LAN Setup Window
2 Do one of the following:
! Click the DHCP assigned IP address radio button and perform
the following steps:
– Click Apply.
Aurorean Network Gateway
LAN Setup
Help
VPN Status
VPN Setup
VPN
Connectivity Setup
Internet Setup
LAN Setup
Firewall Setup
ANG-1100 System
Set Password
Device Status
Firmware Update
Advanced Utilities
Links
Config File Editor
LAN Address Assignment:
DHCP assigned IP address
Manual assigned IP address
192
168
1
1
255
0
100
DHCP server enabled
Starting IP address:
Number of IP addresses:
Enable DNS proxy
Enable WINS proxy
192
168
1
255
255
100
Apply
IP address:
Subnet: