Filter
Top Products
2-6
Setting Up the Scanner
R4C448
Rev. C
A5 size CHAP2.FM
2/11/00 Pass 3
L
Proof Sign-off:
tanto name SEI Y.Takasaki M.Fujimori
leader name M.Fujimori
editor name SEI M.Kauppi
Plugging in the Scanner
1. Make sure that the scanner is turned off. The scanner is off
when the
P
operate
button is not pushed in beyond the
surface of the front panel.
2. If the power cord is not attached to the scanner, connect it to
the AC inlet on the back of the scanner, and plug the other
end into a properly grounded electrical outlet.
c
Caution:
It is not possible to change the scanner's voltage. If the label on
the back of the scanner does not show the correct voltage for your
country, contact your dealer. Do not plug in the power cord.