Filter
Top Products
54
Fine-tuning the Projector
■
A/V Mute
Selects the screen color or image to display when you press
the
A/V Mute
button. The logo setting displays an image that
you have transferred to the projector (see page 51).
■
BNC
Specifies the format for input to the
Computer 2/
Component Video
port. If the source is a computer, select
RGB.
If the source is a video device, select
YCbCr
or
YPbPr.
■
Sleep mode
When sleep mode is on, the projector turns off the lamp if it
has not received any input signals for 30 minutes. Turn sleep
mode off if you want the lamp to remain on all the time.
5. When you’re finished, press
Esc
.
Setting Advanced Features
You can use the Advanced menu to configure the projector for rear
projection or ceiling mounting, and adjust several other features.
1. Press the
Menu
button.
2. Use the arrow keys (control panel) or the
Enter
button (remote
control) to highlight
Advanced
. You see the features and their
settings on the right side:
3. Press
Enter
to select the Advanced menu.
Language
Startup Screen
Color Setting
Rear Proj.
Ceiling
Reset
Select [English]
Execute
:
:
:
:
Video
Audio
Effect
Setting
User's Logo
Advanced
About
Reset All
Absolute Color Temp. RGB
ON OFF
ON OFF
ON OFF
Select
:Select :Enter
5600 and 7600.book Page 54 Thursday, December 14, 2000 2:46 PM