Filter
Top Products
Connecting to Additional Equipment
85
2. Disconnect your Macintosh’s mouse cable. Connect the other end
of the projector’s mouse cable to the mouse or USB port on your
Macintosh.
Connecting the Audio Cable
If your presentation includes sound and you want to use the
projector’s built-in speakers, you’ll need to connect the audio cable.
1. Connect one end of the audio cable to the
Audio 1
port on the
projector.
2. Connect the other end of the audio cable to the speaker or
audio-out port on the Macintosh.
audio cable
Audio 1 port
5600 and 7600.book Page 85 Thursday, December 14, 2000 2:46 PM