Filter
Top Products
88
Connecting to Additional Equipment
Connecting to a DVI Video Source
The projector’s Digital Visual Interface (DVI) receives pictures
directly from your computer in digital format. This lets the projector
display images of greater clarity than can be achieved using a standard
analog VGA connection.
To project images in digital video format, follow these steps:
1. Connect the computer’s DVI cable to the projector’s DVI port.
2. Using the tip of a pen or a small screwdriver, slide the
Computer 1
interface switch to the right to select
Digital
. (If you
need to use the projector’s VGA port again, be sure to slide the
switch back to the left.)
If you want to connect audio for this computer, use the projector’s
Audio 1
port; if you want to connect a mouse cable (to use the remote
control as a wireless mouse), use the
Mouse
port.
Computer 2 /
Component Video
Computer 1
Analog Digital
Audio 1 Audio Out
Control (RS-232C) Mouse
S-Video
L-Audio2-RVideo
Remote
DVI port
slide switch to right
5600 and 7600.book Page 88 Thursday, December 14, 2000 2:46 PM