Filter
Top Products
24 Setting Up the Projector
To use the lens shift, press the
Lens Shift
button on the remote control, then use the
lrud arrow buttons to adjust the image position. To return the lens to the center, press
and hold any arrow button until the lens moves to the center and stops.
Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the
lens shift function to change the lens position.
The amount by which you can shift the image is expressed in terms of the horizontal (H) and
vertical (V) image size, as shown below:
Note that the image cannot be moved to the maximum distance in both the vertical and
horizontal directions at the same time. For example, when the image has been shifted
horizontally by the full amount, it can be shifted vertically by only 9 percent of the height of
the image.
If the image is centered on the screen but one side is taller than the other, adjust the front feet
so that the projector is level.
Maximum lens
shift boundary