Filter
Top Products
Making Detailed Adjustments 45
■ Trigger Out
Select
Power
to have the
Trigger out
port output a 12-volt signal to lower your
projection screen when the projector is running. Or select
Anamorphic Wide
to engage
a motorized anamorphic lens (commercially available) when the
Anamorphic Wide
or
Horiz. Squeeze
aspect ratio is selected.
The PowerLite Pro Cinema 61000 has two settings,
Trigger Out 1
and
Trigger Out 2
,
that let you use its two
Trigger Out
ports for independent functions.
Note: If you change this setting, the new setting will take effect the next time you turn the
projector on.
■ Illumination
Turn off this setting to deactivate the lights on the projector’s Ppower button and power
light. Use this setting if you find the lights distracting in a darkened room.
■ Sleep Mode
Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode
shuts the projector off automatically when there is no video signal.)
Select
5min.
,
10min.
, or
30min.
as the length of time before shutoff; decreasing the time
conserves power and extends the life of the lamp.
To turn the projector back on, press the Ppower button on the remote control or the
projector.
■ Lens Lock
Disables the focus, zoom, and lens shift. If you try to use one of these functions, a lock
icon appears on the screen.
■ Child Lock
Lets you lock the Ppower button on the projector’s control panel to make it more
difficult for a child to turn on the projector. See page 29 for more information.
Settings > Operation > Trigger Out
Settings > Operation > Illumination
Settings > Operation > Sleep Mode
Settings > Lock Setting > Lens Lock
Settings > Lock Setting > Child Lock