Filter
Top Products
50 Using the Projector on a Network
Using the Projector on a Network
When you connect the PowerLite Pro Cinema 61000 to your network, you can select
projector settings and control projection from a web browser. This lets you access the
projector remotely. You can also use e-mail alerts to notify you if a problem occurs with the
projector.
Connecting the Projector to Your Network
1. Connect a Category 5 network cable to the projector’s
LAN
port and to your network’s
switch or router.
2. Press the
Menu
button on the remote control.
3. Open the
Network
menu and select
Wired LAN
.
4. Turn on
DHCP
if your network assigns addresses automatically. Otherwise, select
Off
and
enter the projector’s IP address, subnet mask, and gateway address. (For details, see
page 47.)
Tip: If you have multiple projectors connected to your network, you can enter a name for each
projector to help you identify it on the network. In the Network menu, select Basic, then select
Projector Name.
LAN port