Filter
Top Products
Problem Solving 61
Problem Solving
This section explains how to interpret the projector’s status lights, solve problems with the
picture and remote control, and contact technical support.
What To Do When the Lights Come On
or Flash
The lights on the projector indicate the projector’s
status and let you know when a problem occurs.
If the projector isn’t working correctly, first turn it
off, let it cool down, and unplug the power cord.
Then plug the power cord back in and turn on the
projector. If this doesn’t solve the problem, check
the projector’s status lights.
Lights indicating normal operation
Light state Cause and solution
All lights are off The projector is turned off or in standby mode. You can unplug
the projector or turn it on.
Note: If the power button and power light don’t light up,
they may have been turned off using the Illumination setting
(see page 45).
Power light flashes The projector is warming up. Wait for the picture to appear.
Power light is on Projection is in progress.
Power light
Lamp and temperature lights
Power
button