Filter
Top Products
38 Making Detailed Adjustments
■ RGBCMY
Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 27).
Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color
components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press
Esc
to move to another menu option. You can also access this setting by pressing the
RGBCMY
button on the remote control. See page 29 for more information.
■ Gamma
Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 27).
You can select from five gamma settings (2.0 to 2.4) or customize your own setting from
your image or a displayed graph. Lower values will increase the contrast of dark areas, but
tend to blur the bright areas. Higher values will darken the light areas.
■ Color Gamut
Note: This setting can only be used when the Color Mode is set to THX (see page 27).
Lets you select the color gamut according to the equipment being used. Select from the
following standards: HDTV, SMPTE-C, and EBU.
■ Super-resolution
Can be used for upscaled video, to sharpen the image and enhance apparent detail. You
can select from 3 levels of enhancement. Note that intentionally blurred parts of the
image, such as out-of-focus backgrounds, may become sharper. You can also access this
setting by pressing the
Super-res
button on the remote control.
Image > Advanced > RGBCMY
Image > Advanced > Gamma
Image > Advanced > Color Gamut
Signal > Super-resolution