Filter
Top Products
69
Realignment to print another alignment pattern
and repeat this step.
Note: The square you select becomes the middle square
(#5) the next time you align the print head.
Cleaning PictureMate
To keep PictureMate working at its best, you should
clean it several times a year.
1 Turn off PictureMate, unplug the power cable, and
disconnect the power adapter and any USB cable
or device.
2 Remove all paper, then use a soft brush to clean
any dust or dirt from the paper feeder and output
tray.
3 Clean the PictureMate exterior with a soft, damp
cloth.
4 Use a soft, dry cloth to clean the PictureMate
screen. Do not use liquid or chemical cleaners.
Caution: Never use a hard or abrasive brush, or alcohol or
thinner for cleaning; they can damage the components and
case. Don’t get water on the components and don’t spray
lubricants or oils inside PictureMate.
Replacing the Remote Control Battery
If the remote control stops working, you need to
change the battery. Use a CR2025 lithium button
battery only.
1 Turn the remote control upside down.
2 Push in the latch and slide out the battery holder.
You may need to use a small screw driver or other
tool.
3 Remove the old battery. Then place a new battery
in the holder.