Filter
Top Products
72
Printing is too slow.
● It takes a few moments for PictureMate to process
your images before printing them.
● If PictureMate is in a hot or sunny location, move it
to a cooler place and try printing again.
● If you print continuously for 30 minutes,
PictureMate may slow down to prevent
overheating. Leave the printer powered on, but
allow it to cool off by not printing for at least 30
minutes.
For faster printing, try these tips:
● Don’t print more than 40 pictures at a time.
● Photos with borders print faster than borderless
photos.
● Turn off special features such as color effects and
red-eye reduction.
● If PictureMate is connected to a USB hub,
disconnect any USB devices that you’re not using.
The remote control doesn’t work.
● Make sure the power light is on.
If PictureMate is in standby mode (the power light
is orange), you can turn it on by pressing the
P On button on the remote control. If the power
light is off, you need to press the P On button on
the printer itself.
● Make sure you are close enough (within 16 feet)
and you point the remote directly at the printer.
● Make sure the battery is correctly installed in the
remote control. You may need to replace the
battery. See page 69.
You can’t save photos from the Photo Storage
menu.
The Photo Source may be set to External Device or
Print History. You can only back up photos that are on
a memory card. See page 32.
You can’t raise PictureMate’s handle straight up.
The handle is not designed to go all the way up.