Filter
Top Products
Setting Options Description
Auto Reduction On Reduces size of incoming faxes to fit on the size of
paper selected as the Paper Size setting.
Off Prints incoming faxes in original size or on multiple
sheets, if loaded paper size is smaller.
Parent topic: Setting Up Fax Features Using the Product Control Panel
Fax Communications Options
Set the communication options you want to use for faxing over your phone line.
Setting Options Description
DRD All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
Single
or more phone numbers to the same line and assign
Double different ring patterns to each. If you use this service,
select the number of rings for your fax number as the
Triple
DRD setting so your product can receive faxes on the
Double & Triple correct number of rings. All is the default setting and
works for phone lines that do not use this service.
ECM On Turns on Error Correction Mode (ECM) to
automatically request retransmission of faxes
received with detected errors (default setting).
Off Turns off Error Correction Mode (ECM).
V.34 On Transmits faxes at 33.6 Kbps (default setting)
Off Transmits faxes at 14.4 Kbps
Rings to Answer 1 to 9 Sets the number of rings before your product receives
a fax. The default setting is 4. If Auto Answer is turned
on and an answering machine is connected to the
product, make sure this setting is set higher than the
number of rings your answering machine is set to
answer a call.
165