Filter
Top Products
90 EpsonNet MacAssist Configuration Utility
❏ Since the new password takes effect after the data is sent to the
print server, enter the old password immediately after changing
the password.
❏ If you forget your password, you need to initialize the print
server. See “Initializing the Print Server” on page 229 for
instructions.
Configuring the Print Server Using EpsonNet
MacAssist EasySetup
You can also use EpsonNet MacAssist EasySetup to configure the
print server for TCP/IP and AppleTalk printing.
Note:
❏ Currently, EPSON printers don’t support TCP/IP printing in a
Macintosh environment (except for the EPSON Stylus Photo 2200
and Stylus C82).
❏ Make sure the printer is turned on.
❏ The computer to use for the following steps must be in the same
segment as the print server.
❏ When you assign an IP address manually, we recommend you use
EpsonNet MacAssist to set the subnet mask and default gateway.
Follow the steps below to configure the print server using
EpsonNet MacAssist EasySetup.
1. Double-click the MacAssistxxx folder, and then double-click
the EpsonNet MacAssist EasySetup icon.
2. The EpsonNet MacAssist Easy Setup dialog box appears.
Click Next.
3. Read the License Agreement and then click Next.