Filter
Top Products
10
EpsonNet WebAssist 197
10
10
10
10
10
10
10
10
10
10
10
Follow the steps below to change the IP address using EpsonNet
WebAssist.
1. Turn on your printer.
2. Run EpsonNet WebAssist using one of the following ways.
❏ Run EpsonNet WinAssist or EpsonNet MacAssist. Select
the printer you want to configure from the list and then
click Launch Browser.
❏ Open your browser, and then type in the IP address of the
print server directly. Do not run EpsonNet WinAssist or
MacAssist.
http://IP address of print server/
Example: http://192.168.100.201/
Note on NetWare setting:
❏ From any NetWare client, log in to the target NetWare server
or NDS context with supervisor privileges.
❏ You cannot create a print server, print queue, or printer with
EpsonNet WebAssist. You must have created these objects
before using EpsonNet WebAssist.