Filter
Top Products
112 Installing the Printer Driver
Note:
If the Add Printer wizard prompts you to select either Keep
existing driver or Replace existing driver, be sure to select the
Replace existing driver radio button.
8. Click Finish and follow the on-screen instructions to complete
the setup.
When you print using Microsoft Network Shared printing in
the Windows XP/Server 2003/2000/NT environment, see
“Using the NET USE command” below for more details.
Using the NET USE command
If you are running Windows XP/Server 2003/2000/NT and using
NetBIOS to connect to the printer, we recommend that you use
the NET USE command, as follows:
1. Click Start, point to Control Panel, and then point to
Network Connections. Select Local Area Connections.
2. Click the Properties button.
3. Check that Client for Microsoft Networks is installed. If it is
not installed, click Install to install it.
4. Run the command prompt and enter the following command:
NET USE printer port: \\NetBIOS name of print server\Device
name of print server
Selecting the port
1. Click Start, and then click Printers and Faxes.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set with
the NET USE command.