Filter
Top Products
36 How to Set Up the Print Server
Setting an IP Address Using EpsonNet
WinAssist
This section explains how to use EpsonNet WinAssist to configure
the print server.
Note:
❏ Check that the necessary protocols are installed on the computer.
❏ Make sure the printer is turned on.
❏ The computer to use for the following steps must be in the same
segment as the print server.
❏ The sample screens are taken from Windows 98 using EpsonNet
WinAssist. Other systems may differ in appearance, but the
instructions are the same, except as noted.
1. Click Start, point to Programs or All Programs
(Windows XP/Server 2003), then select EpsonNet WinAssist.
Click EpsonNet WinAssist to start it.
2. Select the printer you want to configure, then click
Configuration or double-click the printer icon.