Filter
Top Products
122 Installing the Printer Driver
Using the NET USE command
If you are running Windows XP/Server 2003/2000/NT and using
NetBIOS to connect to the print server, we recommend that you
use the NET USE command, as follows:
1. Check that the following services are installed.
Right-click the Network Neighborhood icon on the desktop
and select Properties. Click the Services tab and check that
Server or Workstation is listed.
2. If it is not installed, click Add.
3. Run the command prompt and enter the following command:
NET USE printer port: \\NetBIOS name of print server\Device
name of print server
Selecting the port
1. Click Start, point to Settings, then select Printers.
2. Right-click the printer icon, then select Properties.
3. Click the Ports tab, then select the port you have set with the
NET USE command.