Filter
Top Products
84 EpsonNet MacAssist Configuration Utility
Items Explanations
Method for specifying
the IP address
Select a method for specifying an IP address.
When you select Automatic, an IP address,
subnet mask, and default gateway are
automatically assigned by the DHCP server.
Note:
If the Dynamic DNS function is not supported, we
recommend that you select Manual and then
enter an IP address. If you select Automatic, the
IP address of the print server changes every time
you turn on the printer so that you need to
change the printer port setting accordingly.
Set using PING Select this check box when setting the IP address
using the ping command. When not using the
ping command, clear this check box.
Set using Automatic
Private IP Addressing
(APIPA)
Assigns a private IP address automatically even
if there is no DHCP server on your network. It is
dimmed if this function is not supported.
IP Address Enter an IP address for the print server. Be sure
that the IP address is unique and does not
conflict with any other device on the network.
Subnet Mask Enter the subnet mask of the IP address.
Default Gateway Enter the gateway address. If there is a server or
a router that functions as a gateway, enter the
IP address of the server or the router. If there is no
gateway, leave the default values.
Extended Settings Click this button for extended settings such as
Dynamic DNS and Universal Plug and Play. If
both functions are not supported, this button is
dimmed.