Filter
Top Products
Introduction 13
Overview
This section describes the general procedure on how to set up the
print server for use on a network.
1. Check the print server operation.
Check the functions and operations of the print server, such as
status lights, status sheet button, and RJ-45 connector. See “Print
Server Operation” on page 8 for details.
2. Install the necessary components on the computer.
Make sure the necessary components (such as TCP/IP, NetBEUI,
etc.) are installed on the computer, and network settings (such as
the IP address, subnet mask, etc.) of the computer is set. See
“Installing Components on Your Computer” on page 15 for
details.
3. Connect the print server to the network.
Connect the print server to the network. See “Connecting the Print
Server to the Network” on page 31 for details.
4. Install EpsonNet WinAssist/MacAssist on the computer.
Install EpsonNet WinAssist or MacAssist on the computer to
configure the print server. See “Installing EpsonNet
WinAssist/MacAssist” on page 33 for details.
5. Set an IP address for the print server using EpsonNet
Win/MacAssist.
Assign an IP address to the print server, using EpsonNet
WinAssist or MacAssist. For Windows users, see “Setting an IP
Address Using EpsonNet WinAssist” on page 36. For Macintosh
users, see “Setting an IP Address Using EpsonNet MacAssist” on
page 42 for details.