Filter
Top Products
6
Settings for NetWare Server 155
6
6
6
6
6
6
6
6
6
6
6
In NetWare Administrator, double-click the NDPS Manager
object and click the Printer Agent List button. Check that the
status of the Printer Agent you have just created is “Idle”.
Note:
If you have selected Remote (rprinter on IPX), configure the print
server using EpsonNet WinAssist, as described in the next section,
and then print a status sheet.
Go to the next section if you select Remote (rpinter on IPX).
Go to “Setting the printer on client workstations” on page 156 if
you select Remote (LPR on IP) or Forward jobs to Queue.
Configuring for NetWare using EpsonNet
WinAssist
Follow the steps below if you want to use the printer in IPX
network.
Note:
Be sure that the one of the following clients is installed on your computer:
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on your printer.
2. From any NetWare client, log in to the target NetWare server
as an ADMIN.
3. Run EpsonNet WinAssist from the Start menu. See
“NetWare” on page 62 for details.
If the IP address of the printer is already assigned, you can
use EpsonNet WebAssist too. See “NetWare” on page 205 for
details.