Filter
Top Products
Faxing (Fax Model Only) 255
8
8
8
8
8
8
8
8
8
8
8
8
In the list above, a shaded area indicates the printable area and a vertical
line in the shaded area indicates the location of the header information
(head of the original).
*1
Divided: Received image is output on 2 pages.
*2
Rotated: Received image is rotated.
*3
Reduced: Received image is reduced in the sub-scan direction only.
*4
Trimmed on both ends: Both ends of the received image are trimmed.
Note:
When paper is loaded in both the MP tray and the optional paper cassette,
paper in the MP tray is printed.
Basics of receiving faxes
When the product has an attached phone, you can select from four
reception modes for receiving a call. The default is set to the Fax
only mode.
To change the reception mode, follow the steps below.
1. Press the Setup button on the control panel.
Setting item Description
Auto switching The call is received by the attached phone and
the product automatically answers after the
phone rings for a certain duration specified by
the Attached Phone Timeout setting.
Fax only The product automatically answers and
receives the fax.
Phone only The call is received by the attached phone. Fax
reception is not performed.
TAM When an attached phone detects a fax/phone
signal while answering an incoming call, the
product automatically receives the fax.