Filter
Top Products
262 Faxing (Fax Model Only)
4. Make sure Auto Redial Tries is selected, then press the
r Right button.
5. Press the u Up or d Down button to specify your desired
number of redial attempts.
Note:
You can also set the number of auto redial attempts by entering the
number using the numeric keypad.
6. To exit the settings, press the l Left button several times or
another mode’s button.
Printing sender information
This function is used to print sender information with a
transmission data. When Print Sender Info is set to On, the date,
day of week, time, sender’s name, sender’s phone number, and
page number (fraction style display) are automatically printed at
the top of the transmission image.
Note:
❏ Page numbers will not be printed when performing a manual
transmission.
❏ Part of the document may be lost since the above information
overwrites the document data.
1. Press the Setup button on the control panel.
The Setup light is lit and the Setup menu appears in the LCD
panel.
Setting Note
On Prints the sender information
Off Does not print the sender information (default settings)