Filter
Top Products
Faxing (Fax Model Only) 261
8
8
8
8
8
8
8
8
8
8
8
8
1. Make sure that the product is in Fax mode. If not, press the
Fax button to enter the Fax mode.
2. Press the u Up or d Down button several times until
Overseas Mode appears.
3. Press the l Left or r Right button to select On or Off.
4. Press the u Up button several times to exit the overseas mode
setting, or make other settings if necessary.
Changing outgoing faxes settings
You can change the number of auto redial attempts and whether
to print the sender’s information with a transmission data.
Auto Redial
This function is used to specify the retry interval and the total
retries when unable to connect to the recipient due to a busy line.
Note:
The number of redial attempts can be set between 0 and 99. If you do not
use the auto redial function, select 0.
1. Press the Setup button on the control panel.
The Setup light is lit and the Setup menu appears in the LCD
panel.
2. Press the d Down button twice to select Fax Settings, then
press the r Right button.
The Fax Settings menu appears.
3. Press the d Down button to select Transmission Settings,
then press the r Right button.