Using the Control Panel 297
9
9
9
9
9
9
9
9
9
9
9
9
Reset Fuser Counter
Reset the fuser unit service life when you replace the fuser unit.
Support Menu
When On is selected, the product automatically comes out of the
standby mode when a person stands in front of the product. This
shortens the amount of time it takes for the product to warm up
after coming out of power-save mode. The default setting is Off.
Printer Adjust Menu
Note:
This menu is a special function. You don’t have to change it for ordinary
use.
Plain
Adjusts the density for normal paper. Printing becomes darker as
the value increases.
Item Settings
Plain 0 to 15
SemiThk 0 to 15
Thick 0 to 15
ExtraThk 0 to 15
Card 0 to 15
Envelope 0 to 15
Feed Offset -3.5 to 3.5 mm
Scan Offset -3.5 to 3.5 mm
Calibration -