Filter
Top Products
Epson Stylus CX7000F Series
14 10/06
5. You see the File Save Settings window:
Choose the location where you want to save your scanned
file and type a name for it in the Prefix box. Select a file
format in the Image Format box.
6. Click
OK. The image is scanned and you see its icon or
filename in an open folder.
Restoring Color in Faded Photos
You can automatically transform an old, faded, or badly
exposed color photo into one with true-to-life color and
sharpness as you scan. Look for the
Color Restoration option
in Epson Scan’s Full Auto, Home, and Professional Mode
windows:
1. Place your original photo on the scanner as described on
page 5.
2. Start Epson Scan (see the previous section for instructions).
3. When the Epson Scan window appears, do one of the
following, depending on the currently selected scan mode:
❏ Home or Professional Mode: go to step 4.
❏ Full Auto Mode: click the
Customize button, click the
Color Restoration checkbox, and click OK. Continue
with step 9.
4. Select the basic settings for the type of original(s) you are
scanning, then select the destination setting for the way you
will use your image(s) (see the on-screen User’s Guide for
instructions).
5. Click the
Preview button to preview your image(s), then
select your scan area.
6. Do one of the following to select the Color Restoration
option:
❏ Home Mode: Click the
Color Restoration checkbox.
❏ Professional Mode: Scroll down to the Adjustments
area and click the
Color Restoration checkbox.
7. Make any other necessary image adjustments.
8. Size your image as necessary.
9. Click the
Scan button to scan and restore the color in your
image(s).
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the
nozzles in the print head may be clogged or ink may be
running low in one or more of the ink cartridges. Follow the
steps below to check the print head nozzles and remaining ink
levels using the control panel.
1. Load letter-size paper in the sheet feeder.
2. Press the P
On button to turn
on the CX7000F Series, or
press the y
Cancel/Back
button until you see a screen
like this:
3. Press the
Setup button. You
see this display:
4. Press the u or d button, or
press the
3 key on the numeric
keypad, to display this option:
12:00 PM Y
1.Load/Eject
3.Nozzle Check