Filter
Top Products
Epson Stylus CX7000F Series
18 10/06
4. Follow the instructions on the screen to print a vertical
alignment sheet. You see a window like this one:
5. Look at the five sets of patterns in your printout. For each
set, if you see a pattern with no visible vertical lines, enter its
number in the corresponding box on the screen and click
Next.
If you can’t find an aligned pattern, choose the one that’s
closest to being aligned. Click
Realignment and then Print
to print another alignment sheet and repeat this step.
6. Click
Print to print a black horizontal alignment sheet.
After it’s printed, you see a window like this one:
7. Look at the printout and select the pattern with no gap or
line between the rectangles. Enter the number for that
pattern in the box on the screen and click
Next.
If you can’t find an aligned pattern, choose the one that
looks the best. Then click
Realignment to print another
alignment sheet and repeat this step.
8. Click
Print to print a color horizontal alignment sheet.
After it’s printed, you see a window like this one:
9. Look at the printout and find the pattern with no gap or
line between the rectangles and enter its number in the box
on the screen.
10. If you can’t find an aligned pattern, choose the one that
looks the best. Then click
Realignment to print another
alignment sheet and repeat this step.
11. Click
Finish to close the Print Head Alignment Utility.
Transporting the CX7000F Series
If you need to ship your CX7000F Series, you must prepare it
for transportation by packing it in its original box or one of a
similar size.
1. Turn off the CX7000F Series.
2. Remove any paper from the sheet feeder and close the paper
support.
3. Unplug the power cord from the electrical outlet. Then
disconnect the USB cable from the CX7000F Series.
4. Open the scanner section and make sure the ink cartridge
holder is in the home position on the right.
5. Secure the ink cartridge holder (print head) to the case with
tape.
Caution:
Before you turn on the CX7000F Series, be sure to remove the
tape after installing the printer in its new location.