Epson CX7000F All in One Printer User Manual


 
Epson Stylus CX7000F Series
2 10/06
Specifications
Printing
Printing method On-demand ink jet
Nozzle configuration Black: 90 nozzles
Color: 270 nozzles
(90 each cartridge: cyan, magenta,
yellow)
Print direction Bidirectional with logic seeking
Ink Cartridges
Color Cyan, magenta, yellow, black
Cartridge life 6 months at 77 °F (25 °C) after
opening the package
Temperature Storage: –4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Freezing*: 3.2 °F (–16 °C)
* Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C).
Caution:
To ensure good results, use genuine Epson ink cartridges and do
not refill them. Other products may cause damage to your printer
not covered by Epson’s warranty. Do not use an ink cartridge if the
date on the package has expired.
Paper
Note:
Since the quality of any particular brand or type of paper may be
changed by the manufacturer at any time, Epson cannot guarantee
the quality of any non-Epson brand or type of paper. Always test a
sample of paper stock before purchasing large quantities or printing
large jobs.
Single sheets
Size A4 (8.3 × 11.7 inches)
A5 (5.8 × 8.3 inches)
A6 (4.1 × 5.8 inches)
Letter (8.5 × 11 inches)
Legal (8.5 × 14 inches)
Half-letter (5.5 × 8.5 inches)
4 × 6inches
5 × 7inches
3.5 × 5inches
8 × 10 inches
User Defined up to 8.5 × 44 inches
Paper type Plain bond paper or special paper
distributed by Epson
Thickness 0.003 to 0.005 inch (0.08 to 0.13 mm)
Weight 17 to 24 lb (64 to 90 g/m²)
(for plain bond paper)
Envelopes
Size No. 10 (4.1 × 9.5 inches)
Paper type Plain bond paper
Weight 20 to 24 lb (75 to 90 g/m²)
Note:
Poor quality paper may reduce the print quality and cause paper jams
or other problems. If you have print quality problems, switch to a
higher grade paper.
Do not load curled or folded paper.
Use paper only under these conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Printable Area
* When printing with the borderless feature, print quality may decline in the
expanded area. Before printing large jobs using the borderless setting, print a
single sheet to confirm printout quality.
A: The minimum top margin is 0.12” (3 mm).
B-L: The minimum left margin is 0.12” (3 mm);
0.20” (5 mm) for envelopes.
B-R: The minimum right margin is 0.12” (3 mm);
0.20” (5 mm) for envelopes.
C: The minimum bottom margin is 0.12”
(3 mm).
D The minimum bottom margin is 0.78”
(20 mm) for envelopes.
Note:
Always load paper into the sheet feeder with the short edge first.
Load envelopes flap edge left with the flap side down.
A
C
B-L B-R
Normal Borderless*
Single sheets
Envelopes