Epson 300 Printer User Manual


 
Choosing a place for the printer
When selecting a place to set up your printer, choose a safe,
convenient location that provides the following:
A flat, stable surface
Adequate room around the printer to allow easy operation
and maintenance. Make sure it’s close enough to the computer
for the printer cable to reach.
Place the printer where you can easily unplug the power cord.
Moderate environmental conditions. Select a cool, dry area
and protect your printer from direct sunlight, excessive heat,
moisture, or dust.
Appropriate power source. Make sure you use a grounded
outlet; do not use an adapter plug. Avoid electrical outlets
controlled by timers or wall switches; an interruption in
power can wipe out the information in your computer or
printer memory.
If you place the printer on a stand, follow these guidelines:
Use a stand that supports at least 10 kg (22 lb).
Never use a stand that tilts the printer. Always keep it level.
Provide enough clearance below the stand and between the
legs so your continuous paper flows smoothly.
Place cables so they do not interfere with paper feeding;
secure them to a leg of the stand if possible.
R
Blueberry REV.D
A5 size Chapter 1
95/01/20
Setting Up the Printer 1-3