Filter
Top Products
The printer makes a strange noise, the beeper sounds five times, and
the printer stops abruptly.
Turn off the printer and check for a paper jam, a ribbon jam or
other problems. Let the printer cool. Then try to print again. If the
printer still does not print correctly contact your dealer.
The beeper sounds five times and the PAUSE light comes on.
An error has occurred. Turn off the printer and turn it on again. If
the
PAUSE
light stays on, check for a paper jam or ribbon jam. If
there is no jam, contact your dealer or a qualified service person.
(If an error occurs when you switch between single sheets and
continuous paper, make sure the paper-release lever is in the
correct position.)
The print is faint or uneven
Printed characters have parts missing at the bottom.
The ribbon cartridge may not be installed properly. See page 1-5.
The printout is faint.
The ribbon may be worn out. Replace the ribbon cartridge as
described on page 1-5.
Dots are missing in printed characters or graphics
A line of dots is missing in the printout.
The print head is damaged. Stop printing and contact your dealer
to have the print head replaced.
L
Blueberry REV.D
A5 size Chapter 3
95/01/20
3-4 Troubleshooting