Filter
Top Products
Skip-over-perforation
When you turn on this feature, the printer skips over the
perforations of continuous paper, providing a 1-inch margin
between the last line printed on one page and the first line printed
on the next. Because most software programs set their own top
and bottom margins, you should use this feature only if your
program does not provide them. This feature does not affect
single-sheet paper.
Character table
Character tables contain the characters and symbols used in
different languages. Your printer includes a wide variety of
character tables. See the Appendix for specific characters.
Auto line feed
When the auto line feed feature is on, each carriage return (CR)
code is accompanied by a line feed (LF) code. If your printed text
is unexpectedly double-spaced, set this feature to off. If text lines
print on top of each other, set it to on.
Page length
This option is available only when you use continuous paper with
the tractor. You can set the page length to 8.5, 11, 12, or 70/6 (the
length of A4 paper) inches.
Auto tear off
When you use continuous paper with the push tractor, this feature
advances the paper perforation to the tear-off position where you
can easily tear off the printed pages. When the printer receives
data, it automatically reverses the paper to the top-of-form
position and starts printing, so you can use all of the next sheet.
When you use the tractor to print on labels, set this feature to off.
R
Blueberry REV.D
A5 size Chapter 2
95/01/20
Using the Printer 2-23