Filter
Top Products
Use the arrow keys to highlight the desired communication
speed and then press
Enter.
Parity
To set the type of parity check, highlight
Parity
and press
Enter.
You see the following choices:
None
Odd
Even
Highlight the desired
type
of parity check and press
Enter.
Data length
To change the data length value, highlight
Data
length
and press
Enter.
The number changes from 8 to 7, or from 7 to
8.
Press
Enter
again
if
you want to change back to the
other
number.
Stop
bits
To change the number of stop bits, highlight Stop
bits
and press
Enter.
The number changes from 1 to 2, or from 2 to
1. Press
Enter
again if you want to change back to the other
number.
A-12
Changing DIP Switches and Using Setup