Filter
Top Products
The procedure you use to connect your monitor to the
computer depends on the type of monitor you have. See your
monitor manual for detailed instructions or follow these
general guidelines:
1.
Place your monitor on top of or near the computer. It is
easiest to connect the monitor cable if the backs of the
monitor and the computer are facing you.
2.
If necessary, connect the monitor cable to the monitor.
(Some monitors-such as the Apex-come with
permanently attached cables.)
3.
Connect the monitor cable to the video card connector on
the back of the computer, as shown below. If the plug has
retaining screws, tighten them by hand or with a
screwdriver, depending on the screw type.
4.
If necessary, plug the monitor’s power cord into the
monitor’s power inlet.
Setting Up Your System
1-5