Filter
Top Products
14 Setting Up the Projector
Positioning the Projector
If you’re setting up the projector yourself
and it isn’t already installed in the theater
or conference room you’re using, you’ll
probably want to place it on a table in front
of the screen, as shown. a
This lets you stand in the front of the
room, face the audience, and remain
close enough to the equipment to be able
to control it. Try to leave as much space as possible between the
projector and the screen to get a good-size image.
If you’re using the standard lens, refer to the figure below to help you
determine placement. (For detailed guidelines on placing the projector
with any lens, see page 112.) Note that image size increases with
distance, but can vary depending on how you’ve adjusted the optical
zoom and other settings.
Also keep these considerations in mind:
■ Place the projector on a sturdy, level surface.
■ Make sure there is plenty of space for ventilation around and
under the projector. Do not set the projector on top of loose
papers that could block the vents under the projector.
■ Make sure the projector is within 10 feet of a grounded electrical
outlet or extension cord.
note
You can mount the projector
on the ceiling, or place it
behind a translucent screen
for rear projection. See
page 111 for details.
3 to 5 ft7 to 10 ft37 to 50 ft approx. distance
from screen
TBD